BL210 Evaporator Copper Brazed Plate Heat Exchanger with AISI 316L / 304 Stainless Steel Cover Plates
|
Width
|
Height
|
Horizontal port distance
|
Vertical port distance
|
Thickness
|
Max Plates
|
|
322
|
739
|
205.2
|
631
|
13+2.55N
|
250
|
|
Weight (kg)
|
Heat exchange area (m2)
|
Max pressure (mpa)
|
Max temperature
(℃)
|
Max flowrate
(M3/H)
|
Volume (L)
|
|
13+0.78N
|
0.21 (N-2)
|
3/4.5
|
225
|
100
|
0.2 (N-2)
|
Working principles
The heating surface consists of thin corrugated metal flat plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled.
Standard design
The flat plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer efficiency and to make them rigid.
Dual system
The real dual circuit patented by Baode in a solution with diagonal flow is obtained by means of pressed plates. The Brazed Plate Heat Exchanger can be connected with two independent refrigerant circuits. The special design ensures that each refrigerant circuit is in contact with the entire water flow. The main advantage is that at partial load (only one compressor running) water cooling is uniform and performance is maximized.
Standard materials
Cover plates: Stainless steel AISI 316
Connections: Stainless steel AISI 316
Plates: Stainless steel AISI 316
Brazing material: Copper
Advantages of brazed plate heat exchangers in Industry and HVAC&R
The Baode Brazed plate heat exchangers (BHE) have several advantages over traditional heat exchangers in Industrial and HVAC&R applications.
– The high heat transfer efficiency of the BHE makes it extremely compact and also easy to install in places were space is limited.
– The unit has no gaskets and is therefore suitable in applications were temperature and/or pressure is high e.g. in district heating.
– The Baode supply system reassures that, no matter were you are on the globe, the BHE units are available with a very short delivery time.
Particulars required for quotation
To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:
– flow rates or heat load required
– temperature program
– physical properties of liquids in question
– desired working pressure
– maximum permitted pressure drop
Short delivery time
High quality
Reasonable price
Customer made
Know-how design and customer support
Certified by ISO9001,CE, UL,WRAS,ROHS,CCS etc .
